Allendale is a borough in Bergen County, New Jersey, United States. As of the 2010 United States Census, the borough’s population was 6,505, reflecting a decline of 194 (-2.9%) from the 6,699 counted in the 2000 Census, which had in turn increased by 799 (+13.5%) from the 5,900 counted in the 1990 Census.
Allendale was formed on November 8, 1894, from portions of Franklin Township, Hohokus Township and Orvil Township. The borough was formed during the “Boroughitis” phenomenon then sweeping through Bergen County, in which 26 boroughs were formed in the county in 1894 alone.
Are you in need of a Maytag dishwasher repair? We service all models of Maytag dishwasher throughout the Bergen County as well as Rockland County’s.
Our goal is to provide the fastest and most convenient in-home service you’ve ever had. Our factory trained technicians treat you and your home with the utmost respect. We repair your Maytag dishwasher quickly and efficiently so that you can get back to your life. After every repair, your Maytag dishwasher is thoroughly cleaned, tested, and backed with a one year warranty.
We have done our best to provide you with plenty of information about our company and your Maytag dishwasher on the this pages. Whether you are in need of a repair or just want to know how much detergent to use in your Maytag dishwasher , we will go the extra mile to make your experience with us an exceptional one. It is not a very fun job, and as soon as you start washing dishes by hand, you realize just how much you miss your Maytag dishwasher . There are several things that can go wrong with a Maytag dishwasher , and Appliance Medic Appliance Service can fix them all. If your Maytag dishwasher has stopped working, give us a call today.
MAYTAG DISHWASHER PROBLEMS:
1. MAYTAG DISHWATER DOESN’T CLEAN
Although few Maytag dishwasher s have a water pump belt, if the Maytag dishwasher won’t clean dishes there might be a worn or broken water pump belt. Remove the lower kick panel and the motor will be in the front, the water pump belt is on the bottom of the motor.
2. MAYTAG DISHWASHER WON’T DRAIN
If the Maytag dishwasher won’t drain, the drain pump might be defective. Test the pump motor with an Ohm meter. Drain pumps are not repairable, if it’s defective it will need to be replaced. Just call appliance medic and repair it today.
3. MAYTAG DISHWASHER BUTTONS DON’T WORK
If the buttons don’t work on the control panel the entire touchpad and control panel assembly may need to be replaced. If the display works but the Maytag dishwasher functions are all out of synch, or some of the buttons don’t respond properly the entire touchpad and control panel might need to be replaced. Don’t worry! Appliance medic is here to help you.
4. MAYTAG DISHWASHER LIGHTS FLASHING OR BLINKING
If lights are flashing on the control panel, the heating element might have burned out. The heating element heats the water up to operating temperature. After a set amount of time if the temperature isn’t reached a light on the control panel might start flashing. The heating element can be checked for continuity with an Ohm meter.
5. MAYTAG DISHWASHER LEAKING FROM MOTOR AREA
If the Maytag dishwasher is leaking water from the motor area, the shaft seal might need to be replaced. The shaft seal normally consists of a spin seal which is pressed into the pump housing and a wash impeller that mates with the spin seal to create a water-tight connection.
We understand how much of a pain a failing Maytag dishwasher can be, and we’re ready to head over the very same day you call. If you’re done dealing with appliance problems, and you want quality service fast, just pick up the phone and give us a call Toll Free today at 845 617 1111 or 201 589 2399.
