Washer Repair Service

Washer vibration

Washer vibration can occur if one or more of the shock absorbers is broken or worn out. Check the absorbers to be sure they are installed correctly and in the right position. Sometimes when a washer is moved the shock absorbers separate and have to be put back together. If they are broken or worn out, replace all at the same time.Call Appliance medic for helping you out.

Washer leaking water

If the washer is leaking water the drain pump might have a hole or crack. Or, the bearings might be worn out. Replace the drain pump if it is leaking water, they’re not repairable.Call Appliance medic for helping you out.

Washer won’t start

If the washer won’t start the lid switch assembly might be defective. This is a very common problem. The lid switch assembly can fail either mechanically or electrically. Test any electrical switches with an Ohm meter for continuity. The switches should have continuity according to their design.Call Appliance medic today for helping you out.

Washer won’t spin or agitate

If the washer won’t spin or agitate the drive motor might be defective. This is not common. Check all of the other related parts to this symptom before replacing the motor. If the motor is visibly burned out or physically damaged, replace it.Call Appliance medic today for repair it.

Washer door or lid won’t lock

If the washer lid or door won’t lock the lock and switch assembly might be defective. This is a very common problem. The lock and switch assembly can fail either mechanically or electrically. Test any electrical switches with an Ohm meter for continuity. The switches should have continuity according to their design.Call Appliance medic today.