Master Guide to LG Washing Machine Error Codes: Fixes & Troubleshooting
Is your LG washer showing an unusual two-letter error code and not completing your load? Do not fret. The two-letter code is a helpful diagnostic tool that tells you exactly where the problem is in the appliance.
In this detailed guide, we will go over all the common LG code errors and their meaning. It will show you how to complete repairs on the LG washing machine without having to pay a costly technician.
Why Is My LG Washer Showing an Error Code?
LG washing machines come equipped with an onboard computer. This computer monitors the sensors. If one of these sensors detects something abnormal, such as too slow draining of water or an unbalanced drum, the washing machine pauses the cycle. It displays an error code. By understanding what those codes mean, you can potentially save hundreds of dollars by not having to call for service.
Common Water-Related LG Error Codes
The most frequent issues involve how water enters and leaves your machine.
OE Error Code (Drainage Issue)
The OE Error Code is the most frequently received error code by LG Washing Machines. This error code means the LG Washing Machine is not able to empty or evacuate water within a specified time.
Common Cause of OE Error Code:
Clogged Drain Pump Filter or Kinked Drain Hose.
Common Solution to OE Error Code:
- Remove the small access panel located at the bottom front.
- Use the Manual Drain Tube to drain excess water into a bowl.
- Remove the large Drain Pump Filter and clean out lint, coins, or hair.
- Check the grey corrugated drain hose located at the back for kinks.
IE Error Code (Water Inlet Issue)
IE refers to insufficient water filling in the washer. A washer cannot start its cycle unless it has water available to use.
Common causes of issues are:
- Water valves closed
- Kinks in the fill hoses
- Clogged inlet screens or filters
Common Solution to IE Error Code:-
- Ensure that both of the water valves in your home are in the open position.
- Unscrew each water supply line from the back of the washer.
- Check to see if there is any blockage or debris in the inlet screen.
FE Error Code (Overflow Error)
Your machine will display an “FE” error code if too much water is detected.
Failure of the Water Inlet Valve Manually – The main cause of too much water being detected by the washer is a failed or stuck-open water inlet valve.
Solution: Replacing the inlet valve assembly with a manual filling washer.
Drum and Load Balance Errors
These codes usually pop up during the high-speed spin cycle.
UE or uE Error Code (Unbalanced Load)
A UE code indicates that the washer could not balance the load after several attempts. A little “ue” shows that the washer is trying to rebalance itself right now.
Causes of UE Error Code: A single heavy object, for example,e a rug, or a bulk load of sheets that were twisted together.
How to Fix UE Error Code: Pause the washer and redistribute the clothes manually before restarting. Make sure the washer is sitting level on the floor before restarting.
LE Error Code (Motor Load Error)
When you see code, LE, it means that the machine motor has either locked up or is too laborious for your machine to be pulling through.
Causes of LE Error Code:- Either overloading of your machine or a “thermal protector” trip.
How to Fix LE Error Code:- Unplug the washer and leave for 30 minutes to allow for cooling. Remove some of the load so you can try again. If it still isn’t functioning correctly, there may be an issue with your machine’s rotor or stator.
Door and Sensor Faults
Safety sensors ensure the machine doesn’t start unless it’s fully sealed.
dE, dE1, and dE2 Error Codes (Door Errors)The door is not closed or the door is not locked.
The Problem:
- The door latch is loose or missing.
- The door gasket is not working properly.
- The lock switch is not functioning properly.
The Solution:
- Clean the latch area.
- Ensure there are no items between the door and the latch mechanism.
- If the door closes( clicks) but will not lock, replace the lock assembly.
PE Error Code (Pressure Sensor Error)
The PE code indicates that the water level sensing device is not functioning properly.
The Cause:
- a blocked pressure tube
- a defective sensor.
The Solution:
- Check the thin plastic tube linking the drum to the sensor
- Check if it is blocked or has holes.
Temperature and Power Issues
tE Error Code (Heating Error)
The Cause:- A thermistor or temperature sensor failure.
The Solution:- This is usually a hardware failure requiring a new thermistor or heating element.
PF Error Code (Power Failure)
The Cause:- Power was interrupted while the machine was running.
The Solution:- Restart the cycle. If it continues to occur, check the circuit breaker in your home or avoid using an extension cord.
Is it an Error or a Feature? (CL and Sud)
Some codes aren’t actually “errors” but status updates.
CL Code (Child Lock)
The Cause:- You may have pressed the ‘child lock’ button or pressed and held it for too long. When you see’ CL’ on the appliance display,it could be indicating that the child lock has been activated.
The Solution:- Simply press and hold the child lock button or the two buttons together with the lock icon for 3-5 seconds.
Sud Code (Suds Overload)
The Cause:- If you have excessive suds in your washer,r it is an indication that you have used too much of the wrong type of detergent.
The Solution:- Allow the washer to sit until all the suds have dispersed, ed and then continue washing. Using less high-efficiency (HE) detergent will prevent this problem.
How to Reset Your LG Washing Machine
On occasion, performing a standard “soft reset” on a device can resolve something termed a “phantom” error code.
- Using the Power button, turn off your machine.
- Disconnect it from the power source by removing its plug from the electrical outlet.
- With the appliance unplugged, depress and hold the Start or Pause button for five seconds.
- Reconnect the power source for the machine to determine if the previously displayed error code returns by running the “Rinse & Spin” cycle.
Summary Table of LG Error Codes
| Code | Meaning | Primary Action |
|---|---|---|
| OE | Drain Issue | Clean the pump filter |
| IE | Water Inlet | Check faucets and the |
| hose filter | ||
| UE | Unbalanced | Redistribute laundry |
| DE | Door Error | Close door/ Check latch |
| LE | Motor Error | Reduce load/ Reset power |
| CL | Child Lock | Hold the lock button for 3s |
Conclusion
Regularly cleaning your filters and loading your washer in accordance with its capacity is one solution for preventing most LG washing machine error codes. You might also be able to fix many codes yourself by performing some basic maintenance on the machine. If an LE or FE error code continues to be displayed, then it is advisable to get in touch with an LG repair technician for assistance.
