1 year warranty on limited parts
New York845-617-1111
New Jersey201-589-2399
Fix Call Image
Scheduled Your Service

Submit a ServiceRequestService Request

What is Frigidaire H1 Code and How Can You to Fix It

The refrigerator’s inside temperature is too warm, indicated by the Frigidaire H1 code. You must make sure that the freezer and refrigerator temperature settings are within the range advised by the manufacturer in order to resolve this issue.

However, sometimes it’s more difficult to adjust the temperature of your appliance than just pushing a button or turning a dial. Occasionally, a malfunctioning part is the cause. The H1 code on your refrigerator is frequently a sign that it needs to be professionally inspected.

Reasons Behind the H1 Code on a Frigidaire Refrigerator

For your Frigidaire refrigerator, there is just one H1 error code, however there are several reasons why this code could occur. Fortunately, there is a fix for every one of these reasons.

Here are a few typical explanations for why you might be getting this code, along with some possible fixes to ensure you don’t get it again.

Dirty Coils in Condensers

Your refrigerator’s condenser coils prevent heat from overwhelming the appliance’s cool air. These coils can’t function correctly when they get dirty. This may lead to your compressor overheating as it has to work harder to keep the temperature lower. The H1 notice in this case indicates that the temperature inside your refrigerator is higher than it should be.

Common Rеfrigеrator Issuеs

To solve this problem, you’ll need to clean and maintain your condenser coils. Contact an appliance repair expert to examine the condition of your compressor’s motor if you believe that unclean condenser coils are the cause of your compressor’s overheating.

Evaporator Fan Motor Defective

Frost can accumulate on the evaporator coils of your freezer if the evaporator fan motor stops working. The H1 error number in this instance indicates that the freezer is excessively warm. Your evaporator fan motor needs to be replaced or fixed by a competent appliance professional in order to fix this.

Inaccurate Temperature Control Configurations

Your appliance may heat up more than is advised if your temperature settings are set too high. Usually, you may manually alter the settings on your appliance to resolve this problem. Refer to your handbook for the ideal temperature range. It’s advised to get in touch with your neighborhood appliance expert if this still doesn’t work.

Inadequate Door Gasket

Warmer air is kept out of your appliance by using door gaskets to seal the door. Warm air can get inside your refrigerator through the door’s cracks when they break. The H1 error code is caused by the availability of warm air. Restoring the functionality and efficiency of your appliance will need replacing door gaskets if your fridge door isn’t closing all the way.

Inadequate Door Gasket

Blocked Air Vents

The temperature of your refrigerator is controlled in part by air vents. The device is unable to deliver cold air evenly if it is blocked by food or ice. As a result, the remainder of the refrigerator or freezer becomes overly heated.

Verify that the air vents on your appliance are not obstructed. Try defrosting your refrigerator by taking your stuff out and shutting it off if you see a layer of ice covering your vents. Up to twelve hours may pass throughout the defrosting procedure.

Faulty Defrost Mechanism

The defrost feature on your appliance aids in keeping frost from building up on the evaporator coils. Ice accumulation on the evaporator coils caused by a malfunctioning defrost mechanism obstructs normal airflow and stops the appliance from cooling down.
Your defrost system can need extensive part replacement or repair if it’s malfunctioning. Make an appointment with a local appliance expert for a thorough examination.

Broken Control Board or Thermistor

The thermistor in your appliance communicates with the control board to manage temperature. Your thermistor can be giving the control board inaccurate temperature data if it is broken.

When the control board itself is failing, the thermistor may be fine, but faulty electronic components of the control board may be preventing it from working properly. Permit an expert in appliance repair to examine your thermistor and control board to find the source of this problem.

Broken Control Board or Thermistor

Find the Frigidaire H1 Error Code on Your Refrigerator with Appliance Medic

Enjoy your appliance without letting the Frigidaire H1 code stop you from using it. Make an online appointment or give Appliance Medic a call to get your local appliance expert to help you get your refrigerator operating at its ideal temperature once more.

Submit a ServiceRequest
Service Request